skip to content

November 18, 2026

processplantinsights.com

processplantinsights.com

  • About
  • Heat Transfer
  • Heat Exchanger
LMTD temperature driving force in a heat exchanger showing how local temperature difference varies along equipment length
PPI February 3, 2026 0

LMTD & Temperature Driving Forces Explained – How Heat Transfer Is Actually Driven in Real Process Equipment

Every heat transfer calculation in process plants ultimately depends on one thing:temperature driving force. No matter how large the exchanger, how good the material, or how high the utility flow,…

READ MORE +
Heat duty in a process plant showing energy added and removed per unit time in heat exchanger operation
PPI February 1, 2026 0

Heat Duty – What Required Heat Transfer Really Means in Real Plants

In process engineering, heat duty is one of the most frequently used terms. It appears in datasheets, specifications, simulations, and operating discussions. Yet despite its frequent use, heat duty is…

READ MORE +
heat transfer quantification in process plants
PPI January 29, 2026 0

How Heat Transfer Is Quantified in Process Plants – Turning Physical Behavior into Engineering Decisions

Understanding that heat transfer occurs is only the beginning.Every real engineering decision depends on how much heat is transferred, how fast, and where. Those decisions begin with understanding the required…

READ MORE +
radiation heat transfer outside furnaces in process plants
PPI January 28, 2026 0

When Radiation Cannot Be Ignored – The Conditions Where Radiation Becomes the Controlling Heat Transfer Mode

In many process plants, radiation heat transfer is present but small. Under these conditions, conduction and convection dominate behavior, and radiation can be treated as a secondary effect. However, there…

READ MORE +
radiation heat transfer in furnaces fired heaters
PPI January 27, 2026 0

Radiation Heat Transfer in Furnaces – The Primary Heat Transfer Mechanism in Fired Process Equipment

In fired heaters and furnaces, heat transfer behaves very differently from most other process equipment. Conduction and convection are still present, but they do not define performance in the same…

READ MORE +
radiation heat transfer in high temperature process equipment
PPI January 25, 2026 0

Radiation Heat Transfer in Process Plants – The Heat Transfer Mode That Quietly Dominates at High Temperature

In most process plants, heat transfer discussions focus on conduction and convection. These modes govern the majority of equipment operating at moderate temperatures, where fluids are in motion and metal…

READ MORE +
convection heat transfer in process plants
PPI January 22, 2026 0

Convection in Process Plants – The Heat Transfer Mechanism That Actually Controls Daily Operation

In process plants, heat transfer is rarely limited by the availability of energy. It is limited by how effectively that energy can be carried away or delivered by fluids. That…

READ MORE +
Conduction heat transfer through vessel shells, piping, flanges, and supports in process equipment during low-flow and idle conditions
PPI January 21, 2026 0

Conduction in Process Equipment – The Quiet Heat Transfer Mechanism Engineers Often Underestimate

In process plants, heat transfer is usually discussed in terms of flowing fluids, heat exchangers, and utilities. Convection receives most of the attention because it is visible, adjustable, and strongly…

READ MORE +
heat transfer governing process plant behavior
PPI January 20, 2026 0

Why Heat Transfer Governs Process Plant Behavior – The Invisible Force Behind How Plants Actually Operate

Process plants appear to be controlled by equipment, instrumentation, and operating procedures. Pumps move fluids. Reactors convert materials. Columns separate products. Control systems maintain setpoints. Yet beneath all visible activity…

READ MORE +
natural vs forced convection in process plants
PPI January 15, 2026 0

Natural vs Forced Convection – Two Ways Fluids Move Heat and Why the Difference Matters in Plants

In process plants, convection is the primary mechanism by which heat is transferred between fluids and equipment surfaces. But convection does not occur in only one way. It is also…

READ MORE +

Posts pagination

Previous 1 … 13 14 15 Next

Recent Posts

  • Costing, Fabrication & Inspection of Heat Exchangers – What Impacts Reliability
  • Why Heat Exchanger Troubleshooting Often Fails
  • Instrumentation Errors Affecting Heat Exchanger Performance
  • Debottlenecking Failed Heat Exchangers – Practical Approach
  • Shutdown & Transient Issues in Heat Exchangers

Recent Comments

No comments to show.

Archives

  • November 2026 (8)
  • October 2026 (13)
  • September 2026 (13)
  • August 2026 (13)
  • July 2026 (9)
  • June 2026 (9)
  • May 2026 (15)
  • April 2026 (18)
  • March 2026 (18)
  • February 2026 (16)
  • January 2026 (12)
  • December 2025 (1)

Categories

  • Heat Exchanger
  • Heat Transfer
  • Terms & Conditions
  • Disclaimer
  • Privacy Policy
  • Contact

2026 processplantinsights.com | Blogging WordPress Theme by Legacy Themes